garage door motor repairs perth
Not every dead motor needs replacing.
When the old one is finished.
Real updates, not a whole-day window.
Before any work starts.
Half the motor callouts we attend are not really motor faults at all. The motor is fine. It is being asked to lift a door that is out of balance, or has a broken spring, or has a cable off the drum, and it is failing because it is being made to do the springs' job.
That is why we check the door before we condemn the motor. If the door is out of balance and you replace the motor, you have bought a brand new motor that will burn out too.
What we fix on the motor side:
Motors that hum but do not move. Usually a stripped gear, a seized carriage, or a door the motor cannot lift.
Stripped drive gears in the motor head.
Chains and belts that are loose, jumped, or worn out.
Safety sensors and auto-reverse that trigger for no reason.
SCircuit boards and receivers that have failed, often after a storm or a power surge.
Remotes and wall buttons, supplied and coded.
Motors that will not work after a power outage.
Old motors upgraded to a new, quieter, safer unit with a modern remote and smart phone control if you want it.
Manual doors converted to automatic.
Ring us if the motor is doing any of the following.
If the motor is straining, stop using it. Every extra cycle on a straining motor is doing damage that costs money.

The motor hums or buzzes but the door does not move. and the garage is Often a stripped gear, or a door the motor physically cannot lift.open to the street.

Nothing happens at all. No light, no sound, no movement. Could be power, the board, or the capacitor.

The door opens partway and stops, or reverses back down on its own. Usually travel limits, force settings, a sensor, or an obstruction on the track.

The motor is getting louder, grinding, rattling or screeching where it used to be quiet.

The chain is slack or you can hear it slapping the rail.

The motor runs but the door stays still. The carriage has disconnected from the door.

The door closes and immediately opens again, which is the auto-reverse triggering.

The remote only works from close range, or has stopped working entirely, but the wall button still does.

The motor stopped working after a storm or a power cut.

The motor gets hot or cuts out after a few operations.
Common faults we are called out to across Perth
A motor is worth repairing when the fault is a gear, a chain, a board, a sensor, a capacitor or a setting, and the unit itself is otherwise sound.
A motor is worth replacing when it is old enough that parts are hard to get, when the repair cost is approaching the price of a new unit, or when it has no modern safety features. Older motors often lack a proper auto-reverse, which matters a great deal if there are kids or pets in the house.
We will tell you which category you are in and we will tell you why. If a small repair buys you a few more years, we will say so rather than sell you a motor you did not need.
Every door is a bit different, so we quote the job rather than posting a list price. Ring 0455 515 428 and for the common faults we can usually give you a figure or a tight range on the phone. You hear the price before any work starts, and if we find something extra once the panel is off, we stop and ring you first. We service all the common Perth brands: Merlin, B&D, Steel-Line, Centurion, Danmar and Gliderol. Parts are warranted for 12 months and labour for 3 months.
How it works
"It hums and does nothing" and "it opens halfway then reverses" are two different faults. We can often name it on the phone.
Because a struggling motor is usually a symptom, not the cause.
You get told the price and the reasoning. You decide.
Travel limits, force settings, auto-reverse, sensors and remotes all set and tested before we leave.

Who you will be dealing with
Motor jobs are where a dishonest operator makes their money, because a homeowner standing in a driveway has no way to check whether "your motor is dead, you need a new one" is true.
We are a small Perth business, and our name is attached to every job, so the incentive to sell you a motor you do not need does not exist. We would rather do a small service and have you ring us again in three years than sell you a unit today and lose you.
Our customers consistently mention our communication. The existing review praises "regular updates on expected time of arrival." We tell you what is happening, on the phone and at the door.
Perth mobile service, covering Perth metro wide, with the northern edge at Alkimos, the southern edge at Mandurah and the eastern edge at Kalamunda.
“Amazing service, regular updates on expected time of arrival. Can not fault anything. Very happy customer.”
Debra, Orelia · via Little Aussie, 15 May 2026
Questions
Usually one of two things. The drive gear inside the motor head has stripped, so the motor spins but nothing turns. Or the door is too heavy for the motor to lift, which almost always means a broken spring. Stop pressing the button, because you will burn out the motor. Ring 0455 515 428.
Every door is a bit different, so we quote the job rather than posting a list price. It depends on the unit and the size of the door, and a repair to an existing motor is usually a good deal less than a replacement. Ring 0455 515 428 and for the common jobs we can usually give you a figure or a tight range on the phone. We quote both a repair and a replacement, tell you which is the better value in your case, and let you choose. You hear the price before any work starts.
Most commonly the travel limits or force settings have drifted out of adjustment, a safety sensor is misaligned or dirty, or there is a genuine obstruction on the track that the motor is hitting. It can also be a failing motor or a door binding in its frame. All of it is diagnosable on site.
Power surges commonly damage the circuit board or wipe the motor's stored travel limits. Sometimes it is as simple as reprogramming the limits and recoding the remote. Sometimes the board is gone. We will test it and tell you which, rather than guessing.
Yes. A door off its track is unsupported and can fall. Keep everyone away from it, do not operate the motor, and do not try to lever it back into the track yourself. It is usually caused by a snapped cable, a broken roller or an impact, and all three need proper repair.
Yes. We can replace an old opener with a modern unit, including smart garage door controls you operate from your phone, so you can open the door for a delivery or check whether you left it up. We work with the common Perth garage door brands. Ring 0455 515 428 and we can usually give you a figure or a tight range on the phone.
Tell us what the motor is doing. We will tell you what it means and what it costs.
Call 0455 515 428 now or request a quote.
Related pages

Phone. 0455 515 428
Service. Mobile across the Perth metro. We come to you.
Areas. Perth metro, Alkimos to Mandurah, east to Kalamunda
Hours. 8:30am to 4:30pm. After-hours call-outs by arrangement
Repairs
Doors & servicing
Company
Affordable Garage Door Repairs · URBNFUSION PTY LTD
Prototype by Web Powerhouse